A single-component, UV-resistant, solvent- and isocyanate-free elastic waterproofing material based on modified silane resin technology. It bridges cracks up to 3 mm on horizontal and vertical surfaces.
• Indoors and outdoors
• On horizontal and vertical surfaces
• On terraces
• On balconies
• On roofs
• For the protection of polyurethane thermal insulation foam
• On almost any surface and combinations thereof, including concrete, stone, marble, ceramic, tiles, all kinds of wood, glass, metal, roof tiles, bricks, fiber cement boards, aerated concrete, etc. mineral-based surfaces,
• Drinking water tanks,• In pools and cisterns,
• In wet areas such as bathrooms and kitchens,
• Used against non-pressurized water and soil moisture in places below ground level such as foundations, garages, and basements.
• Used for waterproofing and protection purposes in bridge and deck concretes.
• Does not contain solvents and isocyanates that are harmful to the environment and human health.
• Can be used safely in indoor spaces and in contact with drinking water.
• It has a 100% elastomeric structure and does not lose volume because it does not contain solvents.
• It is UV resistant and does not crack, yellow, or run.Can be easily used outdoors.
• It adheres perfectly to damp surfaces even without primer, providing high adhesion.
• It can be applied without primer depending on the substrate.
• It is very flexible, with crack bridging up to 3 mm and crack filling up to 2 mm.It maintains its elasticity and adhesion properties in cracks and joints that are created and grow with building movement.It has excellent recovery properties.
• Due to its low VOC values, it is not harmful to human and environmental health.It is almost odorless.
• It is easily and quickly applied with a brush or roller.It does not create joints.It can be painted over.
• Because it is single-component, it can be applied easily and quickly.
ACTIVECOAT POLYFAST MS: 2 x 7 kg aluminum foil packages in a 14 kg plastic bucket or 25 kg metal packaging
