A lower-viscosity version of POLYFAST MS; a single-component, UV-resistant, solvent- and isocyanate-free modified-silane waterproofing material developed for large horizontal surfaces.
• Indoors and outdoors
• On horizontal and vertical surfaces
• On terraces
• On balconies
• On roofs
• For the protection of polyurethane thermal insulation foam
• On almost any surface and combinations thereof, including concrete, stone, marble, ceramic, tiles, all kinds of wood, glass, metal, roof tiles, bricks, fiber cement boards, aerated concrete, etc., mineral-based surfaces,
• In drinking water tanks, pools and cisterns,
• In wet areas such as bathrooms and kitchens,
• In places below ground level such as foundations, garages, basements, where there is no pressure on the water and• Used against ground moisture.
• Used for waterproofing and protection in bridge and deck concretes.
• Does not contain solvents or isocyanates that are harmful to the environment and human health.
• Can be easily used indoors and in contact with drinking water.
• It has a 100% elastomeric structure and does not lose volume because it does not contain solvents.
• It is UV resistant and does not crack, yellow, or sag.It can be easily used outdoors.
• It adheres perfectly to damp surfaces even without primer, providing high adhesion.
• It can be applied without primer depending on the ground structure.
• It is very flexible, has crack bridging up to 3 mm and crack filling up to 2 mm.It maintains its elasticity and adhesion properties in cracks and joints that are formed and grow with the movement of the building.It has excellent recovery properties.
• Due to its low VOC values, it is not harmful to human and environmental health.It is almost odorless.
• It is easy and quick to apply with a brush or roller.It does not create joints.It can be painted over.
• Easy and quick to apply as it is single-component.
ACTIVECOAT POLYFAST MS-LV: 14 KG plastic bucket in 2 x 7 kg aluminum foil packaging or 25 kg in metal packaging
